Hydro Ban Waterproofing Liquid
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
Available in 1 gallons and 5 gallon containers.
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
Available in 1 gallons and 5 gallon containers.
HYDRO BAN is a thin, load bearing waterproofing/crack isolation membrane that DOES NOT require the use of fabric in the field, coves or corners.
Available in 1 gallons and 5 gallon containers.
Features & Benefits:
Allow for flood testing in 2 hours at 70°F (21°C) or higher (Refer to cautions section for more information on curing)
Does not require the use of fabric (For gaps 1/8" (3 mm) or less see DS 663.5 for complete instructions)
Thin; only 0.020–0.030" (0.5–0.8 mm) thick when cured
Bonds directly to metal
PVC and ABS plumbing fixtures only
Anti-fracture protection of up to 1/8" (3 mm) over shrinkage and other non-structural cracks
“Extra Heavy Service” rating per TCNA performance levels (RE: ASTM C627 Robinson Floor Test)
Changes in color from a light sage to an olive green when cured
Equipped with anti-microbial technology to protect the treated article.
Rapid drying for a faster time to tile
Install tile
brick and stone directly onto membrane
Exceeds ANSI A118.10 and A118.12
IAPMO approved
Lighter color for ease of inspection
No solvents and non-flammable
